Mounting Dream Speaker Stands Pair, Max 40″ Height Adjustable Speaker Stands Mounts,Heavy Duty Base Extendable Tube,11 lbs Capacity Per Stand,Set of 2 Universal Floor Stands (Speakers Not Included)

I needed to use something to elevate my two legacy Radio Shack Minimus 1 speakers (circa 1970) for rear surround sound. The speaker has no holes so I needed to find something that I can mount the speaker to, After studying all the speaker stand configurations, this one did the job.The speaker is screwed onto the mount using short wood screws. The mounting is sufficient for this size and weight of speaker. The stand itself is plenty sturdy and holds the speaker well without rocking. It seems solid enough.HINT: I had the speakers already wired and the system running and thought that the wires can go through the tubes. Wrong, the connectors got caught in the tubes and couldn’t pass through to the end. Run the wires through both tubes BEFORE putting the two tubes together. This will save you from cutting off the wires and pulling the wire from the top section to the bottom section. I needed to cut the wire, run a wire from the top through to the bottom, reconnect the cut wires and re-attach the blade connectors. Otherwise run the wires from the top hole and fish it out on the bottom hole and adjust the length all the way to the amplifier before cutting/splicing/installing terminal connectors, etc.These speaker stands are a good buy and I’m pleased with the curved neck and the very sturdy base. Happy listening.

I purchased these for my surround system. These work well but where you insert the cables through the stand the connectors for my speakers on the cable ends are too large to fit but it wasn’t a big deal I just ran the cables up the outside of the stand. Where you tighten the height adjustments I could almost feel if I cranked them down super hard I could break the plastic finger gripper but didn’t over tighten and they are fine. The stands are sturdy and work great so I would totally recommend these and they look good. All in all a great product.

The stands work, but I think these were described as having a cord hiding function that is not mentioned in the instructions. If it’s the hollow interior, then it is present but not very large. I had to wrap my cords around the stands to minimize visibility, but it’s not a problem with my setup.

Purchased these stands to mount Polk ES10s to, and they work just fine. Cable management through the shafts of the stands is kind of lacking in terms of ease of feeding the cable through, but at the price point, it’s easy to ignore. They’re nice looking stands and work perfectly for mounting rear surround speakers.

Very easy to set up and very sturdy, also this item works with many speakers so that’s a plus!