Taramps DS 440×4 440 Watts RMS 4 Channels 2 Ohms Amplifier Multichannel Class D Full Range, Crossover High/Low Pass Bridgedable, Aluminium, RCA, Car Show Power System
admin
From the brand
-
In 1999 the creator and owner began creating acoustic audio boxes in his garage. Since then, what really started to attract attention was the power modification in existing amplifiers, as the intention was to design and develop more powerful amplifiers. As a result, the brand developed and gained notoriety in the Brazilian market, thus, with its popularity, we finally entered the American market, making the people fall in love with Taramps.
Specification: Taramps DS 440×4 440 Watts RMS 4 Channels 2 Ohms Amplifier Multichannel Class D Full Range, Crossover High/Low Pass Bridgedable, Aluminium, RCA, Car Show Power System
|
Photos: Taramps DS 440×4 440 Watts RMS 4 Channels 2 Ohms Amplifier Multichannel Class D Full Range, Crossover High/Low Pass Bridgedable, Aluminium, RCA, Car Show Power System
10 reviews for Taramps DS 440×4 440 Watts RMS 4 Channels 2 Ohms Amplifier Multichannel Class D Full Range, Crossover High/Low Pass Bridgedable, Aluminium, RCA, Car Show Power System
Add a review
$82.58
![Lamicall 2024 Wider Clamp & Metal Hook Car Phone Holder Vent [Thick Cases Friendly] Phone Holders for Your Car Mount Automobile Hands Free Cradle Air Vent for iPhone 15 14 13 Pro Max Smartphone](https://cartizzle.com/wp-content/uploads/2024/03/71iT3Q28KmL._AC_SL1300_-300x300.jpg)
Anisha OG –
I had a 20 year old 300 watt Pioneer amp pushing 2 Pioneer 6.5’s in front and an 8” JL Audio sub in a sealed enclosure. I was looking for some more bump and surprise the small size of the aml that fitted in the the palm of my hand. After connecting everything, I was highly impressed!! Definitely handle what it’s given an built in crossover is pretty decent. Enough so that I removed the active crossover. Going to get a 2 channel for the sun and run 2 more speakers for the highs. Great little amp 👍👍
Antonio –
I’m running two infinity 6×9 and 6.5 speakers. Sound is very loud and clear. Amp got a little warm but nothing alarming. Definitely would not run any wires that’s not recommended is something I’ve learned in the pass.
Eric –
Using this for interior speakers and very impressed with it. Super small so fits anywhere and has serious power for the price/size. Very happy
Anthony Gormley –
So I have had this amp for almost 2yrs and it just died. Now that being said I beat the snot out of this amp in all my testing. Its a solid little amp. Been pushing 4 6″ mid bass at 2ohm and 2 tweets at 2 ohm
Kindle Customer –
Purchased this for a 2021 Road Glide. The amp fits nicely on the top of the factory headlight. I have it powering two WDX6MOTO-CD which are rated at 250 watts each. I have the amp set to put out about 275 watts. An amp dyno vid on youtube shows the amp is udnerrated and puts out about 300 watts a channel when bridged. Some may not like the spade style terminals or the non adjustable filters but I made sure the high pass was within the range that my speakers can play. Crossover may be too low for tweeters or smaller coaxial speakers. For the price I have no complaints the price was dropped to below $80 when I purchased. If this was a $300 amp I’d give it four stars for the fixed crossover but for the price it’s a great value. Installed this amp and two days later I went on a trip from Central Texas to Orlando and could hear my speakers cleary at highway speeds.
Israel Cruz –
I saw the youtube dyno test on these amps a while ago and decided to get a couple to try them out on my Harley bagger. Gotta tell you, the reviews were spot on. The amps I had before were more than double the price and they did not sound as well as these. Super easy to tune, no complicated crossover knobs, just raw power with 3 settings: low pass, full and high pass (no need for all that BS if running a DSP anyway). The only thing I don’t like is the spade type connectors but other than that, these are truly amazing amps. Considering the fact that these sound better than most of the big brand amps, The price is amazingly low.
Chris Valencia Foto & VideoChris Valencia Foto & Video –
Bridge 1 channel for mids and the other for tweeters. Just one important thing: use a dsp or crossover. It lets the desired signal for every channel and that’s what make it really loud. I have to turn down the volume for the tweeters cause it was too much. 13v gives you 200w per channel easily, and with just tweeters even more.
Luke –
For under 100 bucks this amp dynos around 120 watts per channel.. loud AF on stock speakers
Michael w. –
didn’t like how it has the speaker terminals share right and left for 4 channel mode. only complaint that I could see. the sound quality is very good. running my super tweets on this wired in at 2ohm in 4 channel mode. sound really clear and does put out good power so much that the super tweets 4″ skar audio, hurt your ears they get so loud but are crystal clear. would recommend for your highs definitely 👌 😉 ✨️ 5 gold stars here.
Datreon –
So small you can almost ball it up in your hands! Say that to say that it can be easy fit’d & almost placed plain out of sight. A true amp & definitely gets the job done for a little of nothing.