Skar Audio TWS-01 1-Inch 240 Watt Max Power Neodymium Silk Dome Tweeters, Pair
$11.18
From the manufacturer
![1](https://m.media-amazon.com/images/S/aplus-media/vc/46ba4e7f-c443-469a-8ae5-97bd06a1f627._CR0,0,970,300_PT0_SX970__.jpg)
![1](https://m.media-amazon.com/images/S/aplus-media/vc/46ba4e7f-c443-469a-8ae5-97bd06a1f627._CR0,0,970,300_PT0_SX970__.jpg)
Skar Audio TWS-01
The TWS-01 are 1-inch silk dome component tweeters engineered by Skar Audio to deliver the ultimate experience in high frequency sound reproduction.
![2](https://m.media-amazon.com/images/S/aplus-media/vc/079e7561-d0cb-4519-b97d-7d815712ecd1._CR0,0,970,300_PT0_SX970__.jpg)
![2](https://m.media-amazon.com/images/S/aplus-media/vc/079e7561-d0cb-4519-b97d-7d815712ecd1._CR0,0,970,300_PT0_SX970__.jpg)
The powerful neodymium magnets of these tweeters allow for added sensitivity and extreme power handling capability.
![3](https://m.media-amazon.com/images/S/aplus-media/vc/e1bbd293-90d4-478f-9e54-72c02d7f941f._CR0,0,970,300_PT0_SX970__.jpg)
![3](https://m.media-amazon.com/images/S/aplus-media/vc/e1bbd293-90d4-478f-9e54-72c02d7f941f._CR0,0,970,300_PT0_SX970__.jpg)
Every set of TWS-01’s come with a high grade crossover which blocks out lower frequencies so the TWS-01’s can operate at their full potential.
![1](https://m.media-amazon.com/images/S/aplus-media/vc/e4fd97bf-175e-495d-ba8a-156dd2901d64._CR0,0,300,300_PT0_SX300__.jpg)
![1](https://m.media-amazon.com/images/S/aplus-media/vc/e4fd97bf-175e-495d-ba8a-156dd2901d64._CR0,0,300,300_PT0_SX300__.jpg)
Technical Specifications
Skar Audio TWS-01
- 1” Silk Dome Component Tweeters
- Impedance: 4 Ohm
- RMS Power: 80 Watts (Pair)
- Max Power: 240 Watts (Pair)
- Frequency Response: 2 kHz – 20 kHz
- Sensitivity: 92 dB
- Powerful Neodymium Magnet
- In-line Crossover Network
- 3 Way Mounting Design: Surface, Angle, and Flush Mount
Specification: Skar Audio TWS-01 1-Inch 240 Watt Max Power Neodymium Silk Dome Tweeters, Pair
|
10 reviews for Skar Audio TWS-01 1-Inch 240 Watt Max Power Neodymium Silk Dome Tweeters, Pair
Add a review Cancel reply
![Skar Audio TWS-01 1-Inch 240 Watt Max Power Neodymium Silk Dome Tweeters, Pair](https://cartizzle.com/wp-content/uploads/thumbs_dir/71d8-iDbVlL._AC_SL1500_-qlcf92d2y7qls6tuk1nomtzevb1q9rxif7sbuuqxjq.jpg)
$11.18
Fishead –
These are really great sounding well-built, solid speakers unfortunately the housing is too large for my application without modifying the door pillar. Too bad because they are great tweeters.
Jason Mims –
I’m really enjoying the sound from the tweeters. I actually had to have them professionally installed, and they work great.
Matthew Hicks –
I have a 2000 Honda Civic Ex coupe and they fit almost perfectly into my stock tweeter mounts. I literally just put a tiny amount of super glue on the bottom and they sit right in place and look factory and sound incredible! If you have my same car or have factory tweeters I literally just cut the plug for the factory tweeters and put the plug head on the new tweeters cable and it works perfectly. There is a hiss when no music is playing but you can’t hear it as soon as sound starts playing. It’s not a ground issue I’ve tried wiring them both ways same result but a little hiss never hurt anybody! 23 dollars and it elevated my sound drastically. Not only way louder highs but no longer crackling and scratchy sound at higher volume. Completely got rid of that. If you’re on the fence on getting tweeters don’t be, these made a massive difference and literally cost nothing. I installed myself with zero experience so anyone can!
Timothy kozik –
some clear very good product well worth the money thank you
Daniel Panduro –
Nothing but happy with this tweeters
Pablo ChachonPablo Chachon –
Decided to replaced the stock tweeters in the a pillars after replacing door speakers and adding an amp. These fit right in place of the stock ones. I put a dab of hot glue to secure them , along with included resistors.The highs sound crisp and smooth. Before it was a little scratchy when hitting the highs. Definitely made an improvement and balanced out the system with the upgraded door speakers and subwoofer.Only negative was the rubber sleeves for the terminals are too short to fully insulate the terminals , running the risk of a short if not insulated with tape /heartstrings. No biggie I clipped excess wiring, soldered my wires and taped everything secure.
Carl BrownCarl Brown –
Or, perhaps what the little vehicle being restored needed.Tried several times to obtain just these little speakers…with frustrating results! Lots of return labels printed.In desperation visited a really cool little local business that installs aftermarket stereo, alarm etc. & was given a tour of what speakers would fit. Thinking the options were just a little too much led to Amazon….and Voila!,,,Here they were…the Exact speakers recommended by the local shop,,,and the cost was just under 1/2 the local business’s price….and no more searching…and they were in our mail in two days….Happy renovation lovers unite, have a glass of something smooth-perhaps a cigar and listen to the music…happy listening…jcmbPS: note the photos of the interior and open doors – all of which are detailed and fun pastimes – one does not enjoin these type efforts without real enthusiasm for learning lots of new and fun skills…Advice to follow; Always get as acquainted as possible by exercising a little down time to research avenues for an effort…and…and..in as much as this vehicle appears to have left the manufacturer’s hands last week-as such it deserved such time …time well spent…and the 24 years it has survived and done well are yet to continue.. Chilton’s repair manuals are the literal “Cats Meow”…happy learning, fellow life enthusiasts…jcmb
K1n3kK1n3k –
I bought these specifically because they were a really close match to the tweeters in Polk T15 Bookshelf speakers. I’ve got them installed right now and I can say that they are an improvement over the stock ones. I did end up designing and printing a set of adapters. The file for that is on Printables,com, just search “Polk T15 Tweeter Replacement Adapter” and then you just print two of those, screw in the tweeter, and connect it through the T15’s original high pass filter. I’m really happy with the result!
Josue –
These really helped my stock radio system voice sounds high and clear 🔥 already ordered another pair 💯
Sarge –
Very nice quality