Scosche FD3090B Compatible with Select 1995-2016 Ford, Mercury, Lincoln and Mazda Double DIN & DIN+Pocket Dash Kit Black
admin
From the brand
-
Scosche: The Gear You Need For the Life You Lead
We always explore new ways to make people’s lives simpler, safer, richer, and happier. That’s why we build the accessories that power your phone, use it hands-free while you drive, listen to great music anywhere, monitor your heart rate, film your ATV ride, jump start your truck, and more. So you can focus on following your passions.
-
Scosche was founded in 1980 as a car audio consulting business by Roger and Scotia Alves. Today, with 200 employees, we’ve expanded to offer over 4,000 consumer technology, power sports, and car audio products. We remain a family-owned company with three generations of the Alves family at our California headquarters, upholding our commitment to innovation, quality, safety, and value.
-
Reforestation and GHGs
We reduce GHGs by using 100% renewable energy and have partnered with Eden Reforestation, an organization that works to restore landscapes around the world. Our donations have funded the planting for more than 13,000 trees. These trees at maturity will each absorb around 22 pounds of carbon dioxide annually. 13,000 x 22 = 286,000 lbs of CO² removed annually
-
-
-
-
-
-
-
-
-
Specification: Scosche FD3090B Compatible with Select 1995-2016 Ford, Mercury, Lincoln and Mazda Double DIN & DIN+Pocket Dash Kit Black
|
Photos: Scosche FD3090B Compatible with Select 1995-2016 Ford, Mercury, Lincoln and Mazda Double DIN & DIN+Pocket Dash Kit Black
10 reviews for Scosche FD3090B Compatible with Select 1995-2016 Ford, Mercury, Lincoln and Mazda Double DIN & DIN+Pocket Dash Kit Black
Add a review
$16.28
John CJohn C –
Installed this bezel kit with a Sony touch screen headunit. I have a late build 2012 Ford F-150 XLT and had no issues when installing the bezel but you should know that the wiring kit does not fit these trucks. The package indicates for a 2004-2008 F150 which requires more wiring than the 2009-2012 models. Save yourself the headache and make sure you get the correct wire harness before soldering the wires up. Also, I wasn’t crazy about the ABS smooth black look when it first arrived so I painted it with some plastic primer and spray paint from Lowe’s. Looks good and I am satisfied. I uploaded pictures of the stock unit, new bezel with paint, and finally with it installed.
DC-Colorado –
Called manufacturer for correct model for my 2009 Ford Expedition and oddly they said didn’t have a model for my vehicle. I then asked him about this model (had done some research) and he said yes it was correct, guess they outsource support. Unit arrived and followed instructions on trimming certain tabs and unit fit radio and dashboard correctly. Had a few centering adjustments to make and am very pleased. This bracket seems stronger than the one the aftermarket installer used. Time will tell but seems much stronger. Would recommend.
James Weitz –
This kit is complicated when you first open it, but with all the models it fits it just takes a little imagination to see which parts you will need. Once you see how you need to configure it it is a piece of cake. It takes a little trimming of unnecessary tabs that you will not need for you installation. That took about 10 minutes with my Dremel, from there it was smooth sailing and a perfect fit that looks like my HU was made for my truck. Very sharp look for sure. I’ve been installing my own stereo equipment for about 40 years and this is one of the best installation kits I have used. I don’t see how you can go wrong with this kit.
jose-medina –
I Loved this install kit I have a 2012 f150 I was worried because some people said it was too short but mine fit Perfect. It all snapped right into place. I put a double din radio the opening had to be wider so I took a razer blade knife and just shaved the opening a little. Then the radio slid right in! (Now as for the wiring harness). All went great! However just remember to run a power wire from the fuse box. at first I hooked everything up then Nothing happen. Then I remembered the previous reviews said you will need a power wire. So at first radio did not turn on then I hooked up a power wire to the fuse box that gets power when ignition is turned on and off when keys are removed. And it did GREAT I love this install kit!
Tom HightowerTom Hightower –
I bought this for my current truck. I have had several other models from the mfg in the past and they never fail to live up to my expectations. I opened the package and verified all parts where present. I am just awaiting delivery of my radio, from Amazon early next week. To complete the install.Based upon my past history with the mfg, I would easily recommend the product to others.Now if the actual install has issues, Ill be sure to update this review. I however do not anticipate any issues.Edit: Installed my radio Installed in my 2012 F150, everything went flawless. Well almost, one notation is that if you try to follow the guide and connect the wires to the radio etc. The power wires for the f150 are evidently controlled by the computer. I had to run a wire directly to the battery and source a switched wire at the fuse box. The plug wires do not match up with anything power wise on the factory harness and again looks like it wouldn’t work anyway.I am leaving my 5 star review as the install looks so good. I am very pleased with my purchase.
Andrew D.Andrew D. –
Fits my 2004 Ford Explorer XLT 4-Door. BUT!!! I had to modify it to fit properly.This product is the catch all double din mount. I had to grind off nearly all the little plastic tabs to make it fit. Luckily I had a Dremel but you easily use wire cutters.It gives you a manual and shows you what tabs and extra plastic parts to cut to fit certain cars and it was accurate for my car.Took me about 30min tops!
Timothy E BolingTimothy E Boling –
I put it in my 2004 mustang convertible everything fit well but because my stereo has a screen to come out i had to motifi and space it out i might hav got the wrong radio adapter but it still worked out maybe i should have looked a little further but it works and im happy I’ve used the same brand before and they always have worked well. Thanks!
genesis oliver –
I’ve been trying to find a kit that would work for my truck since I have a 2001 with a 2008 dash conversion and it is perfect
Chris –
Used this to throw a stereo in my 05 f150, fit good as expected. PS please don’t be one of those people who just cuts out the oem radio harness, spend the 15$ and get an adapter!!
Shawn Beach –
I have been using Scosche brand adapter kits for years now. This had everything I needed, mostly anyway. The instructions are there, but ehh… picture diagrams could use some work. This comes with screws, however none were to screw the radio into the adapter itself. Thankfully the left overs from the factory radio got the job done. The gap between the adapter and vehicles opening could be better, but I have seen far worse. Overall good product and gets the job done well.