Cable Matters 2-Pack 1-Port HDMI Wall Plate in White (4K UHD, ARC, and Ethernet Pass-Thru Support)
admin
From the brand
-
Cable Matters, with headquarters in Southborough, Massachusetts, offers a complete line of cables, adapters, docking stations, and networking products for the home, office, and data center. Cable Matters offers first-class, quality, and affordable products backed by an exceptional customer experience.
-
-
-
Specification: Cable Matters 2-Pack 1-Port HDMI Wall Plate in White (4K UHD, ARC, and Ethernet Pass-Thru Support)
|
Photos: Cable Matters 2-Pack 1-Port HDMI Wall Plate in White (4K UHD, ARC, and Ethernet Pass-Thru Support)
10 reviews for Cable Matters 2-Pack 1-Port HDMI Wall Plate in White (4K UHD, ARC, and Ethernet Pass-Thru Support)
Add a review
$17.30
Courtland Stewart –
The quality of the HDMI outlet was very good I will order more of them.
Brian –
Purchased: Cable Matters 2-Pack 2-Port HDMI Wall Plate in White (4K UHD, ARC, and Ethernet pass-thru support)Review: Works great, looks great, easy to install. Can’t speak to 4k/HDR though as we don’t have any 4k/HDR media devices.That being said: most bad reviews I see do not specify what cable or length of cable they are using in-wall, so I’m hesitant to say the plate “wouldn’t work” for 4k/60FPS. My very short run ended across a bedroom up needing to utilize 35′ of cable which will not support 4k @ 60FPS. I think any CL3 cable you are going to find that says it supports 4k @ 60FPS is going to max out at 25′ (and it’s risky at that length). With the high bandwidth needed for 4k, you really should be trying to place this devices as close as possible to your TV or projector. Even if you were just going up a wall under a TV I’d expect your entire setup to use about 10′ of cable. Most recommendations to get 4k/60fps/HDR will say keep the cable length to under 3-6′ max so introducing these plates plus three additional cables between all your devices you are already going over (plus lots of connectors to cause problems).TL;DR: It’s all about bandwidth. Longer cables cause losses with reduce how much bandwidth you can use (high-frequency losses). I wouldn’t recommend wall plates for 4k @ 60FPS unless you are talking about a very short run in-wall. Verify all of your cables are not something you’ve had lying around since the XBOX 360 days. Above all: always test your setup out before doing an install.
Arthur Deco –
Arrived on time and in good condition. Simple to install and they worked well. Could also be used as an HDMI extender cable. Would recommend.
Kristin –
Simple to use, just attached the cable on the back, plugged in the extension cable, screwed into the, EZ PEEZEE
jayjay –
easy to install
Amazon Customer –
We didn’t know they had an outlet for HDMI cords. After we found out, this was easily installed and looks like it was planned on the entire time. Worked out perfectly!
Brian M. –
I used this so I could run an HDMI cable down the inside of a wall, but have a nice connection plate instead of just an HDMI cable passing through a grommet. It worked really well in a standard depth wall, I don’t notice any difference in the quality of the picture or sound. Overall this is a great plate!
Merlin Mikesu –
Amazing! You plug an electronic HDMI cable into one side carrying a TV signal, and Voila! the same signal passes through to the other side!Senior Schmoe
Tony DeeTony Dee –
Perfect to make my wall mount TV neat. I installed one behind the TV mount on the wall and one below about 3 feet down and it was easy to drop an HDMI cable down the wall to connect the 2 boxes using the connections in the boxes. It looks like a pro did it. I’m very happy.
Mike in GA –
Worked fine for my purpose. Wish it was available and almond also. Nice clean HDMI connection. Used electrical tape to secure HDMI cable inside the wall didn’t want it to pull loose as there is no locking mechanism, just the standard friction fit HDMI female connection.