Steadicam M-2 Core Kits Launched – Entry Point into the Steadicam M-Series Ecosystem

Tiffen has just launched two new Steadicam M-2 “core kits” for operators looking for an “affordable” entry point into the Steadicam M-Series ecosystem. These kits are ready to use out of the box with a vest, arm, full sled, and docking bracket. The main difference between both kits is their powering base, which is either V-Mount or Gold Mount standard. Let’s take a closer look at these kits!

In 2019, Tiffen introduced the Steadicam M-2, one of the company’s most configurable and modular stabilization systems. At launch, the M-2 sled integrated the Steadicam Volt gimbal active horizon assist technology.

In short, the Volt electronics measure the roll/tilt/pan motion of your sled and camera. Then, gyro sensors and powerful brushless motors correct the position of your camera, so it stays level to fight the operator’s body movements, for example, your acceleration/deceleration. Also, the Volt can hold your camera at the desired position with the press of a button. The video below is an excellent introduction to the original Steadicam M-2 and the Volt technology if you want to learn more about it.

Steadicam M-2 Core Kits launched

I could not find the price of the original Steadicam M-2, but considering the M-1 retails for around $45.000, it’s probably around the same. For operators looking for a more “affordable” option, Tiffen released the Steadicam M-2 Core Kits.

However, you can’t have your cake and eat it too. The Steadicam M-2 core kits are less expensive, but they do not come with a Volt gimbal. Here are what you’ll get when you purchase an M-2 core kit:

• One Steadicam Zephyr vest
• A G50X iso-elastic arm that has a 50lbs/22.6Kg maximum payload capacity
• A complete sled with: one M2 flat top stage, one M2 gimbal, an M2 1.58” post, and an M2 1.58” monitor mount
• Your choice between a M2 Gold Mount or V-Mount base
• One M-Series Padded Docking Bracket

Out of the box, you’re pretty much ready to shoot with a solid and versatile Steadicam system. Of course, you’ll have to get yourself a stand – with a heavy payload capacity – for the docking bracket, but that’s pretty much it.

Nonetheless, even if the Steadicam M-2 core kits don’t come with a Volt gimbal, you can upgrade your system later down the road. In addition, the Volt and other accessories may be added at any time for a future-proof Steadicam system.

Price and availability

Steadicam M-2 core kits are available now for $25,500. The Model M2-V Volt upgrade is $6250.

For more information, please visit Tiffen’s website here.

What do you think about these new M-2 core kits? Do you still use a Steadicam to move your camera, or did you entirely switch to a motorized gimbal? Don’t hesitate to let us know in the comments down below!