Mounting Dream TV Mount Full Motion TV Wall Mount for Most 32-65 Inch Flat Screen TV, Wall Mount TV Bracket with Dual Arms, Max VESA 400x400mm and 99 LBS, Fits 16″, 18″, 24″ Studs MD2380-24K TV Mounts
admin
Specification: Mounting Dream TV Mount Full Motion TV Wall Mount for Most 32-65 Inch Flat Screen TV, Wall Mount TV Bracket with Dual Arms, Max VESA 400x400mm and 99 LBS, Fits 16″, 18″, 24″ Studs MD2380-24K TV Mounts
|
Photos: Mounting Dream TV Mount Full Motion TV Wall Mount for Most 32-65 Inch Flat Screen TV, Wall Mount TV Bracket with Dual Arms, Max VESA 400x400mm and 99 LBS, Fits 16″, 18″, 24″ Studs MD2380-24K TV Mounts
10 reviews for Mounting Dream TV Mount Full Motion TV Wall Mount for Most 32-65 Inch Flat Screen TV, Wall Mount TV Bracket with Dual Arms, Max VESA 400x400mm and 99 LBS, Fits 16″, 18″, 24″ Studs MD2380-24K TV Mounts
Add a review
$57.08
mcdavidmcdavid –
The “Mounting Dream TV Mount” was indeed a dream to install. The provided mounting template made placement relative to the studs very easy, they even include a small (but accurate) level to make the process even easier since you can easily handle the level and template at the same time. The mount has added bracket inserts to insure you can secure to studs on both sides of the mount, simply and securely. The range of motion is great with ample horizontal and vertical flexibility for any viewing position. Once the bracket is attached to the wall, the TV bracket easily attaches to the wall mount with large set screws to insure the two parts will not separate once mounted. The mount comes with all necessary screws and directions of the drill bit size to use for pilot holes. As pictured, I used this to mount my 65″ TV – it feels secure in any viewing position desired. Highly recommend this product not only for the installation ease and heavy-duty construction, but the price for the quality is unmatched by any other mount I viewed
Amazon Customer –
This is by far the most complete kit I have ever used to wall mount a new lage 65″ samsung on the wall.The mount will let the tv pull out from the wall, slip side to side angle a large amount left to right, Allow you to adjust the tv’s tilt angle. There is no assembly of the wall mount and it comes with all hardware you need to mount to drywall with studs, brick, stone, even concrete. Find your wall studs and mark them. Determine the height on the wall you want the tv. All fasteners to mount to wall are included. using the supplied kit of screws and spacers mount two bracket to back of tv, very simple. Hang tv on bracket and tighten two already installed locking screws. You will need a phillips screwdriver, socket wrench, tape measure. There are only three steps from start to finish. Holds up to 100 pounds and works .perfectly. It honestly took me less than 45 minutes from start to finish. It operates super smoothly. A great product for the price.
Scott Zucker –
Relatively easy to install, but did require two people. Box had every conceivable adaptor you might need for installation. I love how easy it is to adjust, and the fact that I can use it for watching TV on one side of my living room and then be able to adjust it for watching exercise instruction and using it on the other side of the room where I have open space. Having one that is motorized would of course be wonderful, but that would be considerably more expensive.
MrFliprMrFlipr –
Worked well, needed to mount 55″ TV in grandson room before he came to stay.Lag screws secured to studs, and this adjusts side to side and tilt easily. Tv will be used mostly for teenager gaming, so motion is important.Well built, no cable management built in, but strips of velcro work great.
PMAC –
This wall mounting assembly was delivered on the day promised.It came well packaged, all pieces were in good condition.The unit is well made from heavy duty steel, easily supports a 55″ M series Visio smart tv.The tv locks onto the wall bracket and is very secure, it’s not going to fall, it’s not going anywhere.This unit comes with all the screws, bolts, nuts, washers and spacers needed to mount the tv.The kit also comes with extension pieces that would be needed if wall studs are more than 16 inches on center (I did not need to use them).The kit comes with a template to use to mark where the holes need to be drilled into the wall studs. This template was very helpful.Make sure to use a good stud finder and a level before marking or drilling holes.Once attached, the tv moves in and out and side to side smoothly (a modest pul or push is required) but not too much.The tv sits nice and level on the wall, and stays in the position I put it in – no drooping or swaying.All in all I’m very happy with this product and strongly recommend it.
N. Graber –
Overall this TV mount works great. It was fairly easy to set up, is easy to adjust, and seems sturdy.The most important feature is that this mount allows you to center your TV almost exactly where you want it, even while the TV is pushed all the way back against the wall. With another mount I tried, and many others from what I can tell, when the TV is pressed back against the wall, you are at the mercy of where your wall studs are located. I am surprised the description on this does not clearly indicate this can be done. With many other mounts, sure, you can adjust the position of the TV back and forth, but the TV has to be pulled out from the wall in order to do so. Because this mount has extender brackets, you can mount the center of the unit pretty much anywhere between two studs, although I think this would only be the case with 16 inch studs. In my case, I added the extender brackets to only one end of the mount, which allowed me to center the TV almost exactly where I wanted it. You are limited a little bit by where the holes are, but you should be able to get it exactly centered, or at least within less than an inch of center if the holes aren’t exactly where you need them. Also, when you attach the TV to the mount, you can mount it slightly off center, so you could fine tune in that manner (maybe an inch or so either way, depending where your TV inputs are.Other than that, it’s a TV mount and does what you’d expect it to do. The amount of swivel depends, I think, on the size of your TV. If it’s larger, it’s not going to swivel quite as much until you are limited by hitting the wall. I have a 40″ TV mounted and I am able to swivel more than the advertised 45 degrees. If your TV was smaller, you could probably swivel almost perpendicular with the wall. Swiveling and side to side movement can be done on the fly, but up/down tilt and leveling has to be adjusted with a tool.
diyread –
works very well on our tv
Cheri Forsyth –
Like that it swivels and can be brought forward too.
DD-PDX –
Recently moved and needed to mount my TV–recommended by HelloTech when I ordered their service. It took them a very short time to install and looks great.
Patricia Roome –
What I like the most about this tv mount is is easier to hang and saved me a lot of headaches! I substituted their lag bolts for much larger lag bolts to ensure extra safety however you don’t have to do this. Make sure you lube all joints this mount is very tight right out of the box. I would give this mount a 5 star rating. They do provide extra hardware for your installation which helps alot for easier install.