YAMAHA RX-V385 5.1-Channel 4K Ultra HD AV Receiver with Bluetooth

I’m really happy with this receiver even though I don’t have any speakers hooked up to it. Not using it for a speaker setup might sound like a waste of a product to some people but honestly I’m finding plenty of value in it with it’s other features.The main reason I looked into getting a receiver was so I could have multiple hdmi devices hooked up to my monitor. I looked into hdmi hubs but there are a couple reasons why I’ve chosen a receiver instead.1. Reliability and ease of use. Ok, so like I said I use a monitor in my room, not a tv. Monitors don’t have remotes so anytime I want to change the volume or hdmi input I have to do it manually. It’s a 32 inch monitor about 3 feet to the side of my bed and it’s a nice arms stretch to do so. Not a big deal and while there are plenty of hdmi hubs that offer remote changing or automatic changing I worry about the reliability of those devices. There are plenty of reviews that state their hubs stop working after some months or the automatic hdmi switching starts changing inputs randomly or getting black screens and such. I just didn’t want to hassle with things like that.2. Bluetooth connectivity. This was another feature that I was looking into. Again, there are separate devices that offer this but just like hdmi hubs you will find plenty of reliability concerns. On top of that there’s audio lag and previously when I bought a bluetooth transmitter I had to return it for that reason. Nice thing about this receiver is there is an adjustment for the audio to increase or decrease the audio timing but luckily it isn’t an issue and the audio seems to be timed perfectly with my bluetooth headphones. It pairs up quickly too.I haven’t tried the 4k upscaling with this receiver because I use a 1440p monitor but it’s nice to know that it’s there. Maybe in the future I will find a use for it. There’s also some neat audio presets for things like movies, music and gaming. It’s actually a pretty extensive list. I suppose I should also mention that each hdmi input can be named to your liking for a nice customization feel so when you flip through them you know exactly what’s connected to that input. You can even use the hdmi ports when the unit is in standby mode but you won’t be able to use the bluetooth connectivity.In the end I think this was a good purchase. It’s priced reasonably and I’m getting good use out of it. Sound quality is great and the customizable features are a definite plus. More expensive than getting an hdmi hub and bluetooth transmitter but I think the reliability and extra features make up for this.

I just got this thing yesterday on Sunday. I know, I can’t believe Amazon ships on Sunday!! Thanks Amazon Prime!!I I seriously hate waiting a week to two weeks for my products when ordering online, so I usually just go to the store and buy my products. Amazon Prime is the best thing since white rice. Amazon prime is like not having to deal with your mother in law, because she lives far away : )Oh sorry folks, I forgot I was writing a review on a receiver. LOL.When I was looking over the dimension specs I was concerned that the unit would not fit in the opening of my TV stand due to the height. Based upon the specs, the unit looks like it will barely fit in height. The length and depth of the unit was no problem. My TV stand requires 6″ of height clearance in the slot where the receiver goes. This is due to a wood trim piece in front, but once that piece is cleared I have 6-1/4″ of clearance. The Amazon site says this unit is 6″ tall, so I figured I can just angle the receiver into the opening to clear the front wood trim piece. You might be asking why I don’t just remove the front wood trim piece and then put it back? Because it’s a fancy ornate piece that is glued and mortised into the sliding wood platform, therefore removing and re-installing it would be a bit*h. I decided to take a chance and ordered the receiver. When the unit arrived the retail box was boxed into an Amazon box to avoid damage. I like that they packaged the unit that way, because I like to keep my retail boxes on electronics items. It’s easier to pack electronics back into their original boxes to avoid damage when I move.I removed the receiver from the retail box and checked for physical damage and scratches and everything looked kosher. So I tried to angle the receiver into the TV stand opening and it just wouldn’t work. I needed 2 mm more of clearance, which I didn’t have. Dilemma, dilemma. Do I return the receiver and look for a smaller height receiver? I really wanted this Yamaha receiver, because it has bluetooth, YPAO syncing, USB, and HDMI connectors. Plus all the speakers inputs in the back take banana plug connectors, which I really like for convenience and not having to deal with the cheap spring clip connectors and oxidation of copper wires. Note: Don’t use the silver cheap thin sub woofer wire that comes in the box when you buy your self-powered sub woofer. Spend a few $$s and get the Media Bridge or Monster Cable gold plated cable instead. I didn’t want to have to downgrade my receiver due to the height issue, so I found an awesome alternative!!Tip the receiver upside down and you will see four black plastic pieces used as the feet for this unit. The feet are secured by some small Phillips screws. I removed the feet, because they were too tall. Then I went to Wal-Mart to their hardware department to look for some alternative feet that were not as tall. I was going to go to Depot, but they close at 8 pm on Sundays. I found a package of clear furniture feet for $1 that are smaller in height, but about the same size in the other dimensions to the original Yamaha feet. I used a 1/8″ drill bit to drill a hole in the center of the furniture feet and screwed them into the receiver with the Phillips screws. Then tried to fit the unit in the TV opening and guess what? The receiver fits like a champ!! If you remove the factory feet remember that you need to replace them with something else to elevate the unit. There are vents at the bottom of the receiver and there has to be some clearance, so heat can dissipate from the receiver. Initial impressions are good and everything works so far. I’ll update if I run into any issues with this new edition Yamaha receiver.Update Aug 2018: I was listening to this thing after setting up the YPAO and thinking that the sound was not very good or loud. Plus the subwoofer was not putting out bass in sync with the speakers and the bass sounded muddy low. I called Yamaha tech support and they helped me set up the receiver correctly.They had me press and hold the “straight” button, while pressing and holding the power button to re-set the unit back to factory specs. Note: This will erase all your radio presets, so make sure you write them down so you can input them back in again. So forget this YPAO nonsense and go into the receiver settings screen. The standard default is 8 ohms for your speakers, but all my speakers are 6 ohms. So I had to change the on screen setting to 6 ohms, because there is no switch on the back of the unit like on the older Yamaha receivers.Then apparently in the settings menu, you have to change left front, right front, center speaker, and rear speakers to the “small” setting and the sub woofer setting to “Use.” Then there are individual speaker volume settings for each speaker that have to be turned up from the factory low settings. Somewhere in the settings I was told to set the cut off point at 80 hz (THX industry standard) and select “Normal Phase.” You have to flip the switch on your amp sub woofer box to normal phase also. Also, the -db volume control was so annoying. When I increase the volume the negative db shows up and apparently the numbers head toward zero as you turn the volume knob to the right. So, I changed that setting to increase the numbers instead of the -db. Then I played some Taylor Swift- Style (don’t B judging me) and adjusted the amp sub woofer bass volume to equal my two front speakers and set the cut off frequency at 80 hz. Now everything sounds copacetic and my amp sub woofer really kicks!! I have attached a pic of how to get the blue tooth working, because that was a bit*h to set up and not intuitive.March 2019 Update:This thing still works like a champ!! One cool feature I found is that if you get your ipad or ipod, then go to the bluetooth screen and turn on the bluetooth, and then select the Yamaha receiver; that the bluetooth signal will automatic power on your Yamaha receiver. Click that helpful tab if this info was awesome for you : )

I’ve been a Sony person for many years. But, when I helped my parents buy a new receiver I found the Yamaha Receiver and the quality was excellent!! I had to replace mine because mine just didn’t sound as good as my parents. So, I replaced my Sony with this one and the sound quality is amazingly better. Especially the surround sound. More features and options. Easy to set up and I love the on-screen adjustment menus. I did have a problem with using the microphone included to set up the speakers. It wouldn’t pick up the Subwoofer. So, I did that manually. Other than that, everything is great with this receiver.

Works great for my home surround sound system. It was easy to set up and the instructions are very easy to follow. Bluetooth works perfect!!

I thought I could get the same thing for less money. Should have bought it the second time around instead of a cheaper one. Easy set up. Makes my Radio Shack speakers from the 70’s (Yes) sound great even without a subwoofer. Get one.